Search

F1.1 These requirements cover marine shore power cable sets rated at not less than 20 A and not more than 50 A, 250 V maximum. Each of the marine shore power cable sets is intended to extend the shore power supply from a...

1.1.1 This Standard applies to switchboards nominally rated at 600 V or less and intended for use in accordance with the Canadian Electrical Code, Part 1 (CE Code, Part 1), the National Electrical Code (NEC), ANSI/NFPA 70...

1.1 This Standard covers anti-siphon fill valves intended to be installed in water closet tanks. Note: In this Standard, anti-siphon fill valves are also referred to as "devices". 1.2 In this Standard, "shall" is used to...

1 General 1.1 Scope 1.1.1 [Add the following after the second paragraph] This Standard applies to power-operated radio transmitting equipment designed to be used on standard supply circuits in accordance with CSA C22.1...

1.1 These requirements cover humidifiers rated 600 V or less, and intended to be used in accordance with the National Electrical Code (NEC), ANSI/NFPA 70, and the Rules of the Canadian Electrical Code (CEC), Part I, C22.1. 1...

1. Scope 1.1 This standard applies to electrically heated flexible appliances designed for the application of heat to a bed, or to the human body, such as blankets, pads and mattresses for household purposes, and to control...

Joint standard with UL 1660 1.1 These requirements cover liquid-tight flexible nonmetallic conduit in the 3/8 - 4 (12 # 103) trade sizes of Type LFNC-A (Layered), Type LFNC-B (Integral), and Type LFNC-C (Corrugated)...

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric appliances for the care of skin or hair of persons or animals and intended for household and similar purposes...

1.1 This Standard applies to direct plug-in nightlights not exceeding 10 W input, for indoor use only, in non-hazardous locations and intended to be used in accordance with the Canadian Electrical Code, Part I, CSA C22.1, and...

1.1 As noted in Low Voltage Transformers - Part 1: General Requirements, UL 5085-1, or CSA C22.2 No. 66.1, Low Voltage Transformers - Part 1: General Requirements, the requirements in Part 3 cover Class 2 transformers for use...

1.1 This Standard covers pressurized flushing devices (PFDs) intended to flush water closets, urinals, and other plumbing fixtures and specifies requirements for materials, design, methods of operation, test methods, and...

1.1 1.1.1 The requirements specified in this Standard cover light-emitting diode (LED) equipment that is an integral part of a luminaire or other lighting equipment and that operates in the visible light spectrum between 400...