Search

Note: The ICS Code, scope and project need for this NOI (originally published on January 11, 2022) was updated by the responsible SDO on March 19, 2024. Note: The ICS Code for this NOI (originally published on January 11...

1 Scope 1.1 This Standard sets forth minimum requirements for emergency breakaway fittings, swivel connectors and pipe-connecting fittings of the threadless compression type. Connectors and fittings covered by these...

1.1 This Standard describes in POSIX terms the minimal parameters needed to localize Canadian software. Any software application distributed in Canada should be designed to conform to the presentation rules in use in Canada...

Z241.0 - Definitions and General Safety Requirements for Park Model Trailers 1. Scope This Standard provides the definition of the term "park model trailer" as used in the CSA Z241 Series. It also gives general safety...

Z241.0-03 - Definitions and General Safety Requirements for Park Model Trailers 1. Scope This Standard provides the definition of the term "park model trailer" as used in the CSA Z241 Series. It also gives general safety...

This document specifies requirements for metallic, non-metallic and composite cable ties and their associated fixing devices used for the management and support of wiring systems in electrical installations. 1DV.1 D2 Modify...

Note: As requested by the responsible SDO, this NOI being reissued as the standard was in the initial stages of development for more than 12 months. An additional comment period of August 22 to September 13, 2023 (originally...

1.1 This method determines the resistance of textile materials containing cellulosic fibres to deterioration by the action of a cellulolytic fungus. The method is of particular importance in testing fabrics designed for...

1.1 The wire connectors covered by these requirements are intended for use with copper conductor in accordance with installations covered by the National Electrical Code, NFPA 70; the Canadian Electrical Code, Part I, C22.1...

1.1 General This standard is divided into seven clauses that cover requirements for skin effect trace heating when installed in ordinary locations as well as in hazardous (classified) locations. Clause 1 provides the scope...

This clause of Part 12 is applicable except as follows: 1.1 Replacement: This part of IEC 60730 applies to the partial evaluation of thermal motor protectors as defined in IEC 60730-1 for household and similar use, including...

This clause of Part 1 is replaced by the following. This International Standard specifies safety requirements for electrically operated commercial refrigerating appliances that have an incorporated compressor or that are...