Search

This clause of Part 1 is applicable, except as follows: Replacement of the third paragraph: The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. Addition: This...

IEC 62841-1:2014, Clause 1 is applicable, except as follows: Addition: This document applies to transportable planers, thicknessers and combined planers and thicknessers intended for cutting wood and analogous materials with...

This clause of Part 1 is applicable except as follows: Addition: This part of IEC 62841 applies to transportable bench grinders that can be equipped with one or two accessories as follows: – type 1 grinding wheels in...

This document is applicable to conductive clothing , worn during live working (especially bare-hand working) on AC and DC electrical installations, to provide electrical continuity between all parts of the clothing and a...

This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable drills, with manually fed axial movement of the spindle, having a maximum chuck capacity of 13 mm. NOTE 101...

Note: The designation number for this NOI (originally published on September 7, 2022), was updated by the responsible SDO on October 5, 2022. IEC 62841-1:2014, Clause 1 is applicable, except as follows: Addition: This...

Clause 1 of IEC 61058-1:2016 is applicable except as follows. Addition: This part of IEC 61058 is a subset based on IEC 61058-1. The clauses outlined below are intended to address the specific requirements for switches...

IEC 60601-1:2005+AMD1:2012, Clause 1 applies, except as follows. 201.1.1 * Scope Replacement: This document applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of a HUMIDIFIER, also hereafter referred to as ME EQUIPMENT, in...

This document specifies four formats that are used by parties communicating using the Publish/Subscribe (PubSub) communication model for their multimedia communication purposes. The PubSub parties are: Publisher, Subscriber...

The technologies of this document specified are: — description languages and vocabularies to characterize devices and users; — control information to fine tune the sensed information and the actuator command for the control...

This document: — specifies the required processes implemented in the engineering activities that result in requirements for systems and software products (including services) throughout the life cycle; — provides guidelines...

This part of ISO/IEC 11801, which is a Technical Report a) provides guidance on how to select and assess installed channels which conform to ISO/IEC 11801-1, and clarify if they also support ISO/IEC/IEEE 8802-3:2017/AMD3 for...