Search

1.1 The purpose of this test method is to investigate the ability of mattresses to resist rapid heat release by measuring specific fire test responses when the mattress or mattress set is subjected to a specified flaming...

1.1 This test method determines combustibility parameters for the assessment of degree of combustibility of building materials by measuring the heat release and smoke production from specimens exposed to radiant heat using...

1.1 This method of test is applicable to firestop systems with or without penetrating items such as cables, cable trays, conduits, ducts and pipes. These firestop systems are intended for use in openings in fire resistive...

1 Scope 1.1 These requirements cover stationary engine generator assemblies that are intended for installation and use in ordinary locations in accordance with the following: a) The National Electrical Code, NFPA 70; b) The...

These requirements cover hose in nominal internal diameter sizes of 8 mm up to and including 32 mm for use on portable and wheeled fire extinguishers, hand hose line fixed extinguishing systems, and also as booster hose on...

1.1 The cabinets covered by these requirements are intended for installation in accordance with the National Fire Protection Association Flammable and Combustible Liquids Code, NFPA 30, the Fire Code, NFPA 1, the relevant...

1 Scope 1.1 The cabinets covered by these requirements are intended for installation in accordance with the National Fire Protection Association Flammable and Combustible Liquids Code, NFPA 30, the Fire Code, NFPA 1, the...

This part of IEC 61472 specifies a method for determining the electrical component of the minimum approach distances for live working, for AC systems 1 kV up to and including 72,5 kV. This document addresses system...

1.1 This method of test is applicable to firestop systems with or without penetrating items such as cables, cable trays, conduits, ducts and pipes. These firestop systems are intended for use in openings in fire resistive...

This Technical Report provides recommendations for the selection and testing where necessary of conductor stringing equipment and accessory items used for the installation of bare and insulated overhead distribution...

This document is applicable to conductive clothing, worn during live working (especially bare-hand working) on AC and DC electrical installations, to provide electrical continuity between all parts of the clothing and a...

1 SCOPE 1.1 This Standard sets forth minimum requirements for the material properties and performance of liners used for secondary containment under and around the area of tanks that are installed aboveground for the storage...