Search

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric HEAT PUMPS, including SANITARY HOT WATER HEAT PUMPS, AIR-CONDITIONERS, and DEHUMIDIFIERS incorporating motor...

1.1 This Standard applies to Class A, single- and three-phase, ground-fault circuit-interrupters intended for protection of personnel, for use only in grounded neutral systems in accordance with the National Electrical Code...

This Standard applies to transportable drills, with manually fed axial movement of the spindle, having a maximum chuck capacity of 13 mm. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V...

This document specifies general requirements for production, labelling, test methods and performance characteristics of biological indicators, including inoculated carriers and suspensions, and their components, to be used in...

1 Scope 1.1 This standard sets forth minimum requirements for metallic and nonmetallic safety cans: a) With a maximum capacity of 5.3 US gallons (20 L); b) With a minimum capacity of 8 US fl oz (236 mL); c) That are intended...

1.1 This Standard applies to 60 to 250 °C single- or multiple-conductor, jacketed or unjacketed, integral or non-integral cables and single or multiple coaxial cables for telephone and other communication circuits such as...

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of gas, oil and solid-fuel burning appliances having electrical connections, for household and similar purposes, their...

These requirements cover electrically operated single and multiple station smoke alarms intended for open area protection in indoor locations and portable smoke alarms used as "travel" alarms in accordance with: a)...

1.1 General This Standard provides requirements for the design and evaluation of building components of fibre-reinforced polymers (FRP) in buildings and of building components reinforced with FRP materials. It is based on...

Note: The scope for this NOI (originally published on December 8, 2020) was updated by the responsible SDO on August 22, 2023. 1.1 The requirements of this standard apply to off-board unidirectional and bidirectional...

1.1 These requirements cover devices and systems intended for use in accordance with Annex A, Ref. No. 1, to reduce the risk of electric shock to the user from accessible parts, in grounded or isolated circuits for charging...

[Add the following] This Standard applies to the safety of such equipment designed and constructed for installation and use in accordance with CSA C22.1, Canadian Electrical Code, Part I . Replacement: This part of IEC 61558...