Search

1.1 These requirements cover bare and covered ferrules intended for field wiring and factory wiring for use in accordance with the National Electrical Code, ANSI/NFPA-70 and Canadian Electrical Code, Part I, CSA C22.1. 1.2...

This document gives the safety requirements and measures to reduce risks related to woodworking machines arising during operation, adjustment, maintenance, transport, assembly, dismantling, disabling and scrapping and which...

Scope: The proposed standard will establish a glossary of terms and definitions on low carbon construction along the full life cycle of construction, applicable to both operational and embodied carbon emission reductions. The...

These requirements cover electrically operated single and multiple station smoke alarms intended for open area protection in indoor locations, in accordance: a) Installation of Smoke Alarms, CAN/ULC-S553; b) National Building...

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric HEAT PUMPS, including SANITARY HOT WATER HEAT PUMPS, AIR-CONDITIONERS, and DEHUMIDIFIERS incorporating motor...

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric HEAT PUMPS, including SANITARY HOT WATER HEAT PUMPS, AIR-CONDITIONERS, and DEHUMIDIFIERS incorporating motor...

1.1 These requirements cover fireplace inserts or hearth-mounted stoves intended for installation into factory-built fireplaces. The appliances are generally installed into factory-built fireplaces that have themselves been...

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric HEAT PUMPS, including SANITARY HOT WATER HEAT PUMPS, AIR-CONDITIONERS, and DEHUMIDIFIERS incorporating motor...

This Standard applies to transportable drills, with manually fed axial movement of the spindle, having a maximum chuck capacity of 13 mm. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V...

These Requirements apply to Factory-Built Chimney assemblies which do not require field fabrication. They are for use with gas, liquid and solid fuel-fired residential appliances and building heating equipment, where the flue...

1.1 This Standard applies to Class A, single- and three-phase, ground-fault circuit-interrupters intended for protection of personnel, for use only in grounded neutral systems in accordance with the National Electrical Code...

Note: The standard type, standard sub-type, scope, and project need for this NOI (originally published on July 18, 2023) were updated by the responsible SDO on February 20, 2024. 1.1 Inclusions This Standard specifies the...