Search

1.1 Requirements contained in this Standard cover controls of the light-sensitive or presence-sensitive types, or both; for indoor or outdoor service; intended for the control of indoor or outdoor loads up to a maximum of 20...

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electrical portable, non-self-propelled motor-operated SPRAY EXTRACTION MACHINES with or without attachments and with or...

NOTE: The scope for CAN/CGSB-3.511 was updated by the responsible SDO on September 21, 2021 as the incorrect scope had been inadvertently used for the NOI originally published on October 16, 2019. This standard applies to two...

1 SCOPE 1.1 These requirements cover the construction and performance, exclusive of performance during fire tests, of portable halocarbon clean agent fire extinguishers. Halocarbon clean agent fire extinguishers are intended...

This Standard sets forth the minimum requirements for the adaptation of tank assemblies constructed in accordance with the requirements described in Clause 4.1 for the collection, storage and removal of used oil. Used oil...

1 SCOPE 1.1 This Standard sets forth requirements for flexible underground hose connectors intended for flammable and combustible liquid service at temperatures within the range of -40 °C to +50 °C. 1.2 This Standard also...

These requirements cover factory-built grease ducts and grease duct assemblies that are intended to be installed as alternatives to the grease ducts constructed of all welded 1.37 mm carbon steel or 1.09 mm stainless steel...

This Technical Report provides guidance on the use of Ada when producing high integrity systems. In producing such applications it is usually the case that adherence to guidelines or standards has to be demonstrated to...

1.1 This Standard applies to nonmetallic or composite mechanical protection tubing (MPT), and nonmetallic, composite or metallic fittings, and clamps used for the support, routing and mechanical protection of conductors...

This National Standard of Canada applies to four grades of gasoline to which no lead or phosphorus compounds have been added. They are intended for use in spark-ignition engines under a wide range of climatic conditions. This...

1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National...

This Standard sets forth requirements for smoke detectors and accessories, including mechanical guards to be employed in ordinary indoor locations in accordance with the following: a) In Canada only: 1) Standard for the...