Search

This National Standard of Canada applies to two types of petroleum distillates intended for use in applications as described below. Type No. 1-K Kerosene is intended for use in unvented space heaters as described in CAN3-B140...

1 Scope 1.1 These requirements cover angle-pattern and straightway-pattern hose valves intended for use on standpipes, fire pumps, and hydrants supplying water for fire protection service. 1.2 Requirements for the...

1.1 These requirements cover electrically operated single and multiple station smoke alarms intended for open area protection in indoor locations, in accordance: a) Installation of Smoke Alarms, CAN/ULC-S553; b) National...

1.1 This Part applies to fuses for photovoltaic (PV) systems rated up to 1500 Vdc. 1.2 Fuses for photovoltaic (PV) systems are intended to be used for the protection of photovoltaic strings or arrays and their associated...

The B625 Standard, applies to the design and manufacture of UN portable tanks and their approval by the Competent Authority of Canada. Such UN portable tanks shall have a capacity greater than 450 L and may or may not meet...

This National Standard of Canada describes a product specification in compliance to ISO 19131:2007 – Geographic information – Data product specification for the provision of fundamental geographic information to the public...

These requirements cover the construction and performance, exclusive of performance during fire tests, of portable dry chemical and dry powder (Class D) fire extinguishers. Dry chemical and dry powder fire extinguishers are...

1.1 These requirements cover electrical metallic tubing - steel (EMT) and elbows for use as a metal raceway for installation of wires and cables in accordance with CSA C22.1, Canadian Electrical Code, Part 1, NOM-001-SEDE...

Note: The standard designation number for this NOI (originally published on November 2, 2021), was updated by the responsible SDO on Novembre 9, 2021. This standard applies to two grades of kerosene-type aviation turbine fuel...

This Part applies to semiconductor fuses rated 2000 A or less. DC ratings are optional. NOTE: The Canadian Electrical Code, Part I, defines low voltage as any voltage from 31 to 750 V inclusive and high voltage as any voltage...

1.1 This Part applies to fuses for photovoltaic (PV) systems rated up to 1500 Vdc. 1.2 Fuses for photovoltaic (PV) systems are intended to be used for the protection of photovoltaic strings or arrays and their associated...

This standard specifies the requirements for flexible output cables for power, signal and control, rated up to 1000V, as a component of the Electric Vehicle Supply Equipment (EVSE), used between the supply source or charging...