Search

1.1 This Standard provides requirements for materials, reduced temperature performance testing, and labelling for roll-over protective structures (ROPS), falling object protective structures (FOPS), operator protective...

Scope and object This clause of the General Standard applies except as follows: 1. Scope Addition: This Particular Standard specifies requirements for the safety, including essential performance, of AUTOMATIC CYCLING NON...

1.1 General 1.1.1 This Standard applies to newly manufactured LNG dispenser fuelling and vent hose emergency breakaway shutoff devices, hereinafter referred to as devices. Notes: 1) Devices covered in this Standard are...

B184- General requirements and methods of testing for polymeric subsurface stormwater management structures Scope 1.1 This Standard covers polymeric subsurface stormwater management structures and accessories used in the...

Note: The standard designation number and scope for this NOI (originally published on January 11, 2022) was updated by the responsible SDO on July 18, 2023. 1.1 General This Standard applies to structural antennas, towers...

1.1 This Standard describes testing procedures and states performance requirements for general service incandescent and tungsten halogen reflector lamps. 1.2 This Standard includes performance requirements for (a) wattage; (b...

IEC 60601-1:2005+Amendment 1:2012, Clause 1 applies, except as follows: 201.1.1 Scope IEC 60601-1:2005+Amendment 1:2012, 1.1 is replaced by: This particular standard specifies requirements for the BASIC SAFETY and ESSENTIAL...

This clause of Part 12 is applicable except as follows: 1.1 Replacement: This part of IEC 60730 applies to the partial evaluation of thermal motor protectors as defined in IEC 60730-1 for household and similar use, including...

1.1 This Standard specifies requirements for adjustable speed drives (ASDs) with respect to electrical, thermal, and energy safety considerations. It applies to adjustable speed ac and dc electric drives connected to line...

1.1 This Standard applies to a) indoor and outdoor use Class 2 power supplies with input power of 660 W or less. These units are of both the direct plug-in and cord-connected types that utilize a step-down, isolating...

B184.0-17 - General requirements and methods of testing for polymeric subsurface stormwater management structures Scope 1.1 This Standard covers polymeric subsurface stormwater management structures and accessories used in...

1.1 This Standard applies to the following wiring devices of the general purpose nonlocking and locking types, rated 60 A and less, and intended for use in accordance with the Canadian Electrical Code, Part I: (a) general use...