Search

IEC 60601-1:2005+Amendment 1:2012, Clause 1 applies, except as follows: 201.1.1 Scope IEC 60601-1:2005+Amendment 1:2012, 1.1 is replaced by: This particular standard specifies requirements for the BASIC SAFETY and ESSENTIAL...

1.1 General This Standard specifies requirements for the structural design of unreinforced, reinforced, and prefabricated masonry structures and components in accordance with the limit states design method of the National...

1.1 Application This Standard applies to the a) design; b) siting; c) construction; d) operation; and e) maintenance of facilities for the liquefaction of natural gas and facilities for the storage, vaporization, transfer...

1.1 This Standard provides requirements and guidance to assist first responders and other agencies in selecting the appropriate level and type of personal protective equipment (PPE) when investigating and dismantling...

1.1 This Standard applies to portable luminaires, intended for use in dry, damp, and wet locations, and intended to be used in accordance with the Rules of CSA C22.1, Canadian Electrical Code, Part I, in non- hazardous...

1.1 General This Standard details mechanical, physical, and electrical requirements for a newly manufactured appliance that dispenses natural gas for vehicles directly into the vehicle natural gas fuel storage system...

Scope 1.1 This Standard describes the test procedures required to perform a 24 h simulated-use test. This Standard also provides the calculations required to determine the first-hour rating, maximum flow rate, recovery...

1.1 Purpose This document specifies requirements for an IT asset management system within the context of the organization. This document can be applied to all types of IT assets and by all types and sizes of organizations...

1.1 This Standard applies to gas hose connectors (See Clause 3 Definitions), hereinafter referred to as connectors. They are conduits for conveying gas and depend for gas-tightness on the wall structure of the hose material...

1.1 This Standard applies to unvented portable type gas camp heaters of the catalytic and infrared type only up to and including a maximum input of 12,000 Btu/hr (3 517 w) using propane, butane, and liquefied petroleum gas...

1.1 This Standard applies to portable type gas camp stoves (hereinafter referred to as appliance or stove) having input ratings of 15,000 Btu/hr (4.4 kW) or less per burner for use: a) with propane gas, butane gas, and any...

Purpose and scope This standard specifies the characteristics and test methods relating to pipe and fittings, manufactured from unplasticized poly(vinyl chloride) [PVC-U], with a nominal diameter smaller than or equal to 150...