Search

This International Standard specifies the signalling protocol for the support of the Call Priority Interruption (SS-CPI) and Call Priority Interruption Protection (SS-CPIP) supplementary services at the Q reference point...

Scope 1.1 This Standard consists of primary and supplementary graphic and control sets, 7-bit and 8-bit codes based on the above sets, and rules for code extension. The character sets are intended for general usage in data...

1.1 This Standard specifies energy performance requirements for self-contained drinking water coolers having an hourly rated capacity of up to 21 mL/s (20 US gal/h). Included are: (a) procedures for measuring capacity and...

.1 The purpose of this Standard is to establish the following for large and single packaged vertical air conditioners and heat pumps: (a) definitions; (b) classifications; (c) test requirements; (d) rating requirements; (e)...

Adoption of: ISO 10218-1:2011/ISO 10218-2:2011 1. Scope Part 1 of this Standard specifies requirements and guidelines for the inherent safe design, protective measures and information for use of industrial robots. It...

1.1 This Standard applies to ac and dc motors with inherent overheating protection designed to be used in accordance with the Canadian Electrical Code, Part I, as follows: a) motors with a voltage rating not exceeding 600 V...

1.1 This Standard describes zinc-coated steel wire strand suitable for use as guys, suspension strand, span wires, and overhead ground wire strand. Overhead ground wire strand for electric power transmission is produced free...

1.1 This Standard specifies the test method for measuring and reporting the power consumption of small network equipment. Note: This Standard is technology neutral. 1.2 The following products are not covered by this Standard...

This International Standard defines the Symbolic Music Representation technology. By capitalising the Symbolic Music Representation technology the acronym "SMR" has been derived. A symbolic representation of music is a...

1.1 This procedure defines the long-term thermal resistance (LTTR) of a foam product as the value measured after 5-year storage in a laboratory environment and provides means for its prediction based on an accelerated...

1.1 This Standard applies to manually operated and mechanically operated special use switches that are a) for use on dc, ac/dc, or ac only; and b) rated at not more than i) 60 A at 250 V or less; or ii) 30 A or 2 hp at 600 V...

This International Standard is applicable to thermal-links intended for incorporation in electrical appliances, electronic equipment and component parts thereof, normally intended for use indoors, in order to protect them...