Search

1.1 This Standard covers the: a) Construction, operation, installation, inspection and tests applicable to fire signal receiving centres for fire protective signalling services utilizing fire signal receiving centre...

This Standard covers the: a) Construction, operation, installation, inspection and tests applicable to fire signal receiving centres for fire protective signalling services utilizing fire signal receiving centre facilities...

1.1 This Standard outlines requirements for Exterior Insulation and Finish Systems (EIFS), used in combination with a drained air space as an exterior wall cladding system. It also outlines requirements for water resistive...

This proposed series of standards aim to specify the minimum requirements for consumer directed finance (Open Banking) Considerations are given to: • Application of strong consumer authentication procedures; • Protection of...

CAN/ULC-S540 provides the minimum requirements for the design, installation, inspection, testing and maintenance of residential fire warning systems for use within dwelling units and care occupancies not requiring fire alarm...

Note: The title and scope were updated by the responsible SDO on October 14, 2020. 1.1 This Standard refers to High Performance and Aviation Synthetic Fluorine-Free Foam Liquid Concentrates. Note: The requirements for High...

1.1 This Standard applies to cellulose fibre loose fill thermal insulation suitable for indoor use in building construction within the temperature range of - 60 to 90 °C. 1.2 Insulation material conforming to this Standard is...

1 SCOPE 1.1 This Standard covers construction and performance requirements for control units and accessories for intrusion alarm systems, including: A Protected premises control units and accessories for local or signal...

1.1 General This fenestration Standard/Specification applies to both operating and fixed, new construction and replacement windows, doors, SSPs, TDDs, roof windows, and unit skylights installed into exterior building...

The requirements in this Standard cover emergency exit hardware , and emergency fire exit hardware that will actuate the latching mechanism on a door to allow it to swing open when force is applied to the device.

This test method evaluates the temperature transmission performance of an encapsulation material or assembly of materials installed over a wood substrate when the test specimen is subjected to a standard fire exposure...

The test method in this Standard determines the wind resistance of vegetated roof assembly when subjected to dynamic wind flow and dynamic wind uplift in laboratory conditions.