Search

This part of IEC 61000 for EMC immunity requirements applies to electrical and electronic apparatus intended for use in industrial environments, as described below. Immunity requirements in the frequency range 0 Hz to 400 GHz...

1.1 This Standard applies to cellulose fibre loose fill thermal insulation suitable for indoor use in building construction within the temperature range of - 60 to 90 °C. 1.2 Insulation material conforming to this Standard is...

1.1 These requirements cover heat actuated fire detectors in ordinary (nonhazardous) and outdoor locations, for use as components in automatic fire protective systems, to be installed in accordance with the Standard for the...

The requirements in this Standard cover emergency exit hardware , and emergency fire exit hardware that will actuate the latching mechanism on a door to allow it to swing open when force is applied to the device.

.1 This test method determines the wind uplift resistance of membrane-roofing systems when subjected to dynamic wind load cycles. The test methods are applicable to a) mechanically attached membrane roofing systems; and b)...

The test method in this Standard determines the wind resistance of vegetated roof assembly when subjected to dynamic wind flow and dynamic wind uplift in laboratory conditions.

1.1 These requirements cover regulators used to reduce the pressure of compressed industrial gases from a source or storage cylinder pressure of not more than 5500 psig (37.91 MPa) to the use pressure. 1.2 Regulators covered...

This Standard covers the construction, operation, installation, inspection and tests applicable to fire signal receiving centres for fire protective signalling services utilizing fire signal receiving centre facilities and...

1.1 This Standard sets forth the minimum requirements for steel contained tank assemblies that are used for aboveground storage of flammable and combustible liquids such as gasoline, fuel oil, or similar products with a...

The requirements in this Standard apply to frame assemblies for swinging fire doors. These frame assemblies have demonstrated performance in fire tests sufficient to warrant their use with fire doors which have been assigned...

This part of IEC 61000 for EMC immunity requirements applies to electrical and electronic apparatus intended for use in industrial environments, as described below. Immunity requirements in the frequency range 0 Hz to 400 GHz...