Search

1.1 This Standard specifies requirements for keyboards to be used throughout Canada for word, information, and data-processing applications. 1.2 This Standard defines the national keyboard layout (the primary keyboard layout)...

Note: The scope for this NOI (originally published on March 16, 2021) was updated by the responsible SDO on July 27, 2021. 1.1 These requirements cover the design and construction of Type L vents intended for the venting of...

These requirements cover electrically operated single and multiple station smoke alarms intended for open area protection in indoor locations, in accordance: a) Installation of Smoke Alarms, CAN/ULC-S553; b) National Building...

These requirements cover electrically operated single and multiple station smoke alarms intended for open area protection in indoor locations and portable smoke alarms used as "travel" alarms in accordance with: a)...

Note 1: The standard development activity for this NOI was updated by the responsible SDO on April 20, 2021. Note 2: The scope for this NOI (originally published on March 16, 2021) was updated by the responsible SDO on July...

1 Scope 1.1 These requirements cover metallic and nonmetallic safety cans that have a maximum capacity of 5.3 US gallons (20 L) and that are intended to store and handle flammable and combustible liquids in commercial and...

These requirements cover complete, self-contained strainer or filter assemblies intended for use with designated flammable and combustible liquids, anhydrous ammonia (fertilizer grade), and non-potable water. Flammable and...

These requirements cover suspended ceiling grid low voltage system is intended to be permanently connected, for indoor dry locations, and installed in accordance with the following requirements: Canadian Electrical Code, Part...

1.1 These requirements cover lining systems for new masonry chimneys . 1.2 Liners are for use with gas, liquid and solid fuel fired residential appliances and building heating equipment, where the flue gas temperatures...

Note: The scope for this NOI (originally published on March 16, 2021) was updated by the responsible SDO on July 27, 2021. 1.1 These requirements apply to factory-built chimney assemblies which do not require field...

1 SCOPE 1.1 This Standard covers minimum requirements for shop fabricated, aboveground fire tested tank assemblies intended for storage of flammable and combustible liquids that have a specific gravity not greater than 1.0...

1 Scope 1.1 These requirements cover rating, and performance during fire tests, of fire extinguishers intended for use in attacking Class A, B, C, D, and K fires as defined herein. These requirements also cover performance...