Search

ISO 35101:2017 describes the working environment that can be expected when operating oil and gas facilities in Arctic environments/climate. ISO 35101:2017 provides principles and generic guidelines for the design and...

ISO 35103:2017 gives requirements, specifications and guidelines to ensure that environmental monitoring in the offshore Arctic region is fit for purpose. The Arctic region includes the territory lying to the North of the...

This method is intended for the semi‑quantitative determination of ethyl mercaptan odorant (within the range of 5 to 48 mg/L) in liquid propane in order to confirm that recently stenched propane is odorized to the required...

1.1 This method determines the flame spread properties of a textile or product when a specimen is supported at an angle of 45º and a flame is applied to its upper surface for 1 s. 1.2 The testing and evaluation of a product...

Note: This NOI was withdrawn by the responsible SDO on January 4, 2023 . CAN/CGSB-4.2 No. 30.3-94 will become part of CAN/CGSB-4.2 No.27.5. 1.1 This method describes the laundering and dry cleaning procedures for removing non...

This document describes the method of determining the total moisture content of a test sample of solid biofuels by drying in an oven and is used when the highest precision is not needed, e.g. for routine production control on...

This method describes a procedure for determining the filter plugging tendency of diesel fuels at low temperature usually due to the formation of wax crystals. The method applies to all distillate diesel fuels. Fuels are...

1.1 This method is used to determine the lead content of gasolines, including those containing ethanol. Lead in the range of 1 to 1100 mg/L can be measured. 1.2 The testing and evaluation of a product against this method may...

The ISO 11138 series provides manufacturers and others with the requirements for production, labeling, test methods and performance requirements of biological indicators used to develop, validate and monitor sterilization...

This document, which is a Technical Report, provides recommendations for the selection and testing where necessary of conductor stringing equipment and accessory items used for the installation of bare and insulated overhead...

This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to hand-held hammers. Tools covered by this document include percussion hammers and rotary hammers, including rotary hammers...

A revision is needed based on a safety issue and a change in formula