Search

1.1 This method determines the bursting strength of geotextiles. It is intended primarily for nonwoven geotextiles, although woven or composite fabrics may also be tested for specific applications.

This method determines the length of bootlaces and shoelaces. The method applies to bulk and cut laces.

This method determines the number of wales and courses per centimetre in most knitted fabrics.

This method describes the burning behaviour tests from the CAN/CGSB-4.2 No. 27 Series and recommends which should be used to determine the burning behaviour of different products under various defined conditions.

Web Services Addressing provides transport-neutral mechanisms to address Web services and messages. ISO/IEC 42050:2011 defines the binding of the abstract properties defined in ISO/IEC 42040 to SOAP Messages.

1 Scope This document aims to define the requirements and method used to determine particle size distribution of disintegrated pellets. It is applicable for pellets that fully disintegrate in hot water.

1 Scope This document specifies a method for determining the amount of material passing through a sieve with 3,15 mm diameter round hole.

This method assesses the combustion resistance of mattresses when in contact with a lighted cigarette. This method covers the resistance of mattresses to ignition only by a burning cigarette and does not relate to their...

This method is for use in the laboratory determination of the amount of moisture present in textile materials, expressed either as moisture content or moisture regain. Two alternative procedures are described.

This method determines the conditioned mass of fabrics. It is primarily for use in the laboratory. Unit mass of fabric is usually calculated on the basis of mass per square meter or mass per meter of full width fabric.

This method assesses the fastness of the colour of textile materials to wetting with water. It is applicable to dyed, printed and otherwise coloured fibres, yarns and fabrics of all kinds. In the case of multicoloured...

This part of ISO/IEC 11694 defines the physical characteristics of optical memory cards using the linear recording method.