Search

This part of IEC 61000 for EMC immunity requirements applies to electrical and electronic apparatus intended for use in industrial environments, as described below. Immunity requirements in the frequency range 0 Hz to 400 GHz...

1.1 This method of test is applicable to firestop systems with or without penetrating items such as cables, cable trays, conduits, ducts and pipes. These firestop systems are intended for use in openings in fire resistive...

1.1 These requirements cover heat actuated fire detectors in ordinary (nonhazardous) and outdoor locations, for use as components in automatic fire protective systems, to be installed in accordance with the Standard for the...

The requirements in this Standard cover emergency exit hardware , and emergency fire exit hardware that will actuate the latching mechanism on a door to allow it to swing open when force is applied to the device.

The test method in this Standard determines the wind resistance of vegetated roof assembly when subjected to dynamic wind flow and dynamic wind uplift in laboratory conditions.

Note: The standard development activity for this NOI (originally published on February 25, 2020) was updated by the responsible SDO on November 19, 2024. 1.1 The test methodology in this standard determines the capability of...

Note: The scope for this NOI was updated by the responsible SDO on April 20, 2021 and the title was updated on August 16, 2022. (originally published on April 16, 2020). 1.1 This Standard outlines requirements for the...

This Standard covers the principles governing the design and application of visual components used to create a safety way guidance system (SWGS) and requirements for the installation, inspection, testing and maintenance of...

The requirements in this Standard apply to frame assemblies for swinging fire doors. These frame assemblies have demonstrated performance in fire tests sufficient to warrant their use with fire doors which have been assigned...

This Standard covers the construction, operation, installation, inspection and tests applicable to fire signal receiving centres for fire protective signalling services utilizing fire signal receiving centre facilities and...

This standard presents methodologies for characterizing and quantifying fine and ultrafine particles and volatile organic compound (VOC) emissions from operating 3D printers under normal conditions of use. This method...

.1 The purpose of this Standard is to establish the following for large and single packaged vertical air conditioners and heat pumps: (a) definitions; (b) classifications; (c) test requirements; (d) rating requirements; (e)...