Search

Note: The ICS code, scope and project need for this NOI (originally published June 8, 2021) was updated by the responsible SDO on February 15, 2022. 1 SCOPE 1.1 This Standard covers construction and performance requirements...

This standard applies to Infrared Heaters that are Gas-Fired High-Intensity Infrared Heaters and Gas-Fired Low-Intensity Infrared Heaters with inputs up to and including 117.5 kW per burner intended for installation in and...

This part of IEC 61000 for EMC immunity requirements applies to electrical and electronic apparatus intended for use in industrial environments, as described below. Immunity requirements in the frequency range 0 Hz to 400 GHz...

1.1 This Standard applies to the construction, operation, maintenance and replacement of electric utility systems that are used to generate, transform, transmit, distribute and deliver electrical power or energy to consumer...

1.1 These requirements cover heat actuated fire detectors in ordinary (nonhazardous) and outdoor locations, for use as components in automatic fire protective systems, to be installed in accordance with the Standard for the...

1.1 These requirements cover regulators used to reduce the pressure of compressed industrial gases from a source or storage cylinder pressure of not more than 5500 psig (37.91 MPa) to the use pressure. 1.2 Regulators covered...

CAN/ULC-S540 provides the minimum requirements for the design, installation, inspection, testing and maintenance of residential fire warning systems for use within dwelling units and care occupancies not requiring fire alarm...

Note: The standard development activity for this NOI (originally published on February 25, 2020) was updated by the responsible SDO on November 19, 2024. 1.1 The test methodology in this standard determines the capability of...

.1 This test method determines the wind uplift resistance of membrane-roofing systems when subjected to dynamic wind load cycles. The test methods are applicable to a) mechanically attached membrane roofing systems; and b)...

Note: The scope for this NOI was updated by the responsible SDO on April 20, 2021 and the title was updated on August 16, 2022. (originally published on April 16, 2020). 1.1 This Standard outlines requirements for the...

1.1 This Standard applies to cellulose fibre loose fill thermal insulation suitable for indoor use in building construction within the temperature range of - 60 to 90 °C. 1.2 Insulation material conforming to this Standard is...

The requirements in this Standard cover emergency exit hardware , and emergency fire exit hardware that will actuate the latching mechanism on a door to allow it to swing open when force is applied to the device.