Search

This standard contains requirements for newly produced compressed natural gas fuel system components, intended for use on natural gas powered vehicles. This standard applies to devices which have a service pressure of either...

1 Scope This part of ISO/IEC 80079 specifies the requirements for the design and construction of nonelectrical equipment, intended for use in explosive atmospheres, protected by the types of protection constructional safety...

This Standard specifies the electrical, mechanical, dimensional characteristics, test methods and acceptance criteria for composite station post insulators for outdoor service, operating at nominal voltages greater than 1000...

This European Standard specifies the requirements and recommendations regarding the healthcare provision, facilities and equipment, education, and ethical framework for the good practice of osteopathy.

This clause of Part 1 is applicable except as follows: Addition: This part of IEC 62841 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for...

1. Scope This clause of Part 1 is replaced as follows: 1.1 This standard applies to automatic electrical pressure sensing controls with a minimum gauge pressure rating of -60 kPa and a maximum gauge pressure rating of 4,2 MPa...

This part of ISO/IEC 13066 defines the responsibilities of different information technology (IT) and assistive technology (AT) functional units in supporting interoperability. It recognizes that AT can be provided both as...

Scope This part of IEC 61000-4 defines the methods for measurement and interpretation of results for power quality parameters in 50/60 Hz a.c. power supply systems. Measurement methods are described for each relevant...

This part of ISO/IEC 13818 specifies the extension of ISO/IEC 11172-3 to lower sampling frequencies, the coded representation of multichannel and multilingual high quality audio for broadcasting, transmission and storage...

This clause of Part 1 is applicable except as follows: Addition: This part of IEC 62841 applies to hand-held drills and impact drills, including diamond core drills. This Standard also applies to drills that can be used for...

Clause 1 of the general standard3 applies, except as follows: 201.1.1 Scope Replacement: This part of IEC 80601 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of ROBOTICALLY ASSISTED SURGICAL EQUIPMENT (RASE) and...

1. Scope This clause of part 1 is replaced by: This standard deals with the safety of electrically operated commercial grillers and toasters not intended for household use, their rated voltage being not more than 250 V for...