Search

This document specifies an atomic absorption spectrometric method for the determination of the lead content of rubbers. The method is applicable to raw rubber and rubber products. There is no limit to the concentration of lead that can be determined. High or low concentrations can be determined, provided that suitable adjustments are made to the mass of the test portion and/or the concentration…

This document specifies a gravimetric method for determining the mass per unit area (surface density) of anodic oxidation coatings on aluminium and its alloys. The method is applicable to all oxidation coatings formed by anodizing aluminium and its alloys, either cast or wrought, and is suitable for most aluminium alloys, except those in which the mass fraction of copper is greater than 6 %. NOTE…

This document specifies methods for determining the hiding power given by paint coats of white or light colours of tristimulus values Y and Y10 greater than 25, applied to a black and white chart, or to a colourless transparent foil. In the latter case the tristimulus values Y and Y10 are measured over black and white panels. Subsequently, the hiding power is calculated from these tristimulus…

This document specifies an atomic absorption spectrometric method for the determination of the zinc content of rubbers. The method is applicable to raw rubber and rubber products having zinc contents at a minimum of 0,05 % (mass fraction). Zinc contents below this limit can be determined, provided that suitable adjustments are made to the mass of the test portion and/or to the concentrations of…

IEC 60335-2-97:2016+A1:2019 deals with the safety of electric drives for shutters, blinds and awnings, intended for household and similar purposes, their rated voltage being not more than 250 V for single-phase drives and 480 V for other drives. Battery-operated drives and other d.c. supplied drives are within the scope of this standard. Examples of equipment that can be driven are: - spring…

IEC 60754-1:2011+A1:2019 specifies the apparatus and procedure for the determination of the amount of halogen acid gas, other than hydrofluoric acid, evolved during the combustion of compounds based on halogenated polymers and compounds containing halogenated additives taken from electric or optical fibre cable constructions. The method specified in this standard is intended for the testing of…

IEC 61810-1:2015 applies to electromechanical elementary relays (non-specified time all-or-nothing relays) for incorporation into low voltage equipment (circuits up to 1 000 V alternate current or 1 500 V direct current). It defines the basic functional and safety requirements and safety-related aspects for applications in all areas of electrical engineering or electronics, such as: general…

IEC 61034-2:2005+A1:2013+A2:2019 provides details of the test procedure to be employed for the measurement of the density of smoke emitted from cables burning under defined conditions. It describes the means of preparing and assembling cables for test, the method of burning the cables, and gives recommended requirements for evaluating test results. The principal changes with respect to the…

IEC 60601-2-22:2019 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 60601-2-22:2019 applies to the Basic Safety and Essential Performance of laser equipment for surgical,…