Search

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for...

1.1 Purpose The purpose of this Standard is to specify minimum accessibility and usability requirements for self-service interactive devices intended for public use. Notes: (1) While the purpose of this Standard is to make a...

IEC 60601-1:2005+Amendment 1:2012, Clause 1 applies, except as follows: 201.1.1 Scope IEC 60601-1:2005+Amendment 1:2012, 1.1 is replaced by: This particular standard specifies requirements for the BASIC SAFETY and ESSENTIAL...

This Standard applies to the safety of tungsten halogen lamps intended for use in lighting equipment, designed to be installed on branch circuits not exceeding 750 V and used in accordance with the rules of the Canadian...

"To prepare International standards: concerning protection against electric shock arising from equipment, from installations and from systems without limit of voltage; for the design, erection foreseeable correct use, proper...

Clause 1 of the general standard1 applies, except as follows: 201.1.1 * Scope Replacement: This International Standard applies to the BASIC SAFETY of HEARING INSTRUMENTS and HEARING INSTRUMENT SYSTEMS, hereafter also referred...

This document applies to the basic safety and essential performance of pulse oximeter equipment intended for use on humans, hereafter referred to as me equipment. This includes any part necessary for normal use, including the...

1.1 Purpose The purpose of this Standard is to provide minimum requirements for the design, construction, and marking of electrical equipment or parts of such equipment for use in Class I and Class II, Division 2 and Class...

O302.1-15 - Scaling roundwood Scope 1.1 This Standard specifies minimum requirements for scaling roundwood and covers processes for quality and quantification assurance. Note: Requirements on measuring and estimating...

1.1 These requirements cover hardware for the support of conduit, tubing, and cable, such as HANGERS, STAPLES, STRAPS, and similar devices for installation in accordance with the National Electrical Code, NFPA 70, and the...

1.1 The requirements in this standard cover sealed wire connector systems, including insulating caps, covers, resins, tubing, and tapes provided with, or for use with, specific wire connectors. These systems are intended for...

Note: As requested by the responsible SDO, this NOI being reissued as the standard was in the initial stages of development for more than 12 months. An additional comment period of December 12, 2023 to Januiary 11, 2024...