Search

This document specifies the non-invasive attack mitigation test metrics for determining conformance to the requirements specified in ISO/IEC 19790:2012 for security levels 3 and 4. The test metrics are associated with the...

This clause of part 1 is applicable except as follows: 1. Scope Replacement: This part 2 applies to equipment intended for in vitro diagnostic (IVD) medical purposes, including self-test IVD medical purposes. IVD medical...

This standard covers ballasts, excluding resistance types, for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, associated with tubular fluorescent lamps with or without pre-heated cathodes operated with or without a...

This Standard defines the WS-I Basic Profile 1.1, consisting of a set of non-proprietary Web services specifications, along with clarifications, refinements, interpretations and amplifications of those specifications which...

This Standard defines the WS-I Simple SOAP Binding Profile 1.0, consisting of a set of non-proprietary Web services specifications, along with clarifications and amendments to those specifications which promote...

Update 3 to CAN/CSA C22.2 No. 61010-1-12 + Amd. 1 2018, Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General, as a revised IEC-based CSA Standard.

This clause of Part 1 is replaced by the following: 1.1 This Standard applies to the partial evaluation of thermal motor protectors as defined in Publication 730-1 for household and similar use including heating, air...

1. Scope This clause of part 1 is replaced by: This standard deals with the safety of electric massage appliances for household and similar purposes, their rated voltage being not more than 250 V for single phase appliances...

This clause of Part 1 is replaced by the following: 1.1 This standard applies to the partial evaluation of thermal motor protectors as defined in Publication 730-1 for household and similar use including heating, air...

Scope: This clause of Part 1 is applicable, except as follows: Addition: This standard applies to grinders, POLISHERS and DISK-TYPE SANDERS, including ANGLE, STRAIGHT AND VERTICAL tools, with a RATED CAPACITY not exceeding...

IEC 61010-2-030:2017 specifies safety requirements for equipment having testing or measuring circuits which are connected for test or measurement purposes to devices or circuits outside the measurement equipment itself. These...

This Standard Bridges that interconnect individual LANs, each supporting the IEEE 802 MAC Service using a different or identical media access control method, to provide Bridged Networks and VLANs