Search

1. Scope This clause of part 1 is replaced by: This standard deals with the safety of electrically operated bains-marie not intended for household use, their rated voltage being not more than 250 V for single-phase appliances...

This part of IEC 60079 specifies alternative requirements for construction, test and marking for electrical equipment that provides Equipment Protection Level (EPL) Ga when single standardised Types of Protection (e.g. Ex "ia...

Scope This part of IEC 61000-4 defines the methods for measurement and interpretation of results for power quality parameters in 50/60 Hz a.c. power supply systems. Measurement methods are described for each relevant...

This proposed standard aims to specify guidance for the design, use and evaluation of a regulatory sandbox. NOTE: This standard is not intended for conformity assessment.

Note: This notice of intent was withdrawn by the responsible SDO on June 20, 2023. This Standard specifies a test method that simulates a fire that under well ventilated conditions starts in a corner of a small room with a...

This clause of Part 1 is applicable except as follows: Addition: This part of IEC 62841 applies to hand-held drills and impact drills, including diamond core drills. This Standard also applies to drills that can be used for...

The objective of the Standard is to specify requirements for sharps containers intended to hold potentially hazardous sharps medical waste with or without sharps protection features, e.g., scalpel blades, trocars, hypodermic...

This document provides guidance for organizations performing AI system impact assessments for individuals and societies that can be affected by an AI system and its intended and foreseeable applications. It includes...

This Standard provides test procedures for determining the performance of packaged, self-contained or factory matched hydrogen generation systems with a capacity less than 400 m 3 /h at 0 °C and 101,325 kPa, referred to as...

IEC 62841-4-1:2017 applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in conjunction with a guide-plate and riving knife or in any other way...

This Standard defines the data format for optical memory cards necessary to allow compatibility and interchange between systems using the linear recording method

1. Scope This clause of Part 1 is replaced as follows: 1.1 This standard applies to automatic electrical pressure sensing controls with a minimum gauge pressure rating of -60 kPa and a maximum gauge pressure rating of 4,2 MPa...