Search

This method of test for flammability characteristics is applicable to certain low density insulating materials that do not melt or drip during exposure to fire (see Appendix A). It is used in establishing the Flame Spread...

These requirements cover heat responsive links used for fire-protection service. These links consist of devices intended for installation under load conditions such as for use with automatic fire suppression systems; or...

Note: The standard development activity for this NOI (originally published on May 2, 2023) was updated by the responsible SDO on July 25, 2023 . 1.1 This Standard establishes a minimum level of protection and safety of...

This Standard specifies the requirements for the installation of spray applied low pressure thermal insulating polyurethane foam. The material can be installed as thermal insulation, an air or vapor barrier, or a combination...

1.1 This Standard specifies the requirements for the on-site manufacture and installation of light density, open cell spray applied semi-rigid polyurethane foam to produce a material that meets the physical property...

1.1 This is a fire test response Standard. This document describes the test method used to determine the contribution to fire growth provided by a non-loadbearing insulated building panel installed in a sprinklered or...

1.1 These requirements cover the design and construction of single swing Wood Core Flush Doors, which have shown by fire tests to possess sufficient properties to warrant a 20 min fire-protection rating when tested in...

1.1 This Standard specifies the physical property requirements and test methods to determine the material properties for light density, open cell spray applied semi-rigid polyurethane foam, used as a thermal insulation for...

This part of IEC 61000 specifies EMC immunity requirements which apply to electrical and electronic equipment intended for use in power stations and substations, as described below. Immunity requirements for electromagnetic...

1.1 These requirements cover exhaust hoods for commercial and institutional kitchens and are intended for placement over restaurant type cooking equipment, such as ranges, broilers, deep fat fryers, grills, etc., during...

1.1 This procedure defines the long-term thermal resistance (LTTR) of a foam product as the value measured after 5-year storage in a laboratory environment and provides means for its prediction based on an accelerated...